分切机

SLM-A 型电脑自动高速分切机产品介紹Introduction:

1、该型分切机透合于分切光学膜、BOPP、PE、PET等塑料薄膜、紙張、不干皎、薄片，是二次加エ以及彩印包装企止的理想机型。
2、整机由PLC集中控制(二矢量鬼机)并采用触摸屏人机界面対整机迸行集中操作。
3、放巻采用迸口气刹牟控制，由PLC自劫汁算巻径突現恒張カ控制。
4、牽引控制由一台矢量変頻申机駆劫，突現恒銭速度控制，并有效地隔断收放巻張カ之囘的相互影呵。
5、收巻軸采用滑差式收巻釉由一台矢量変頻屯机躯劫，收巻張カ控制，根据收巻直径，分切厚度，没定張力等参数，由PLC造算后輸出控制信号通辻控制收巻軸的摩擦圧カ，来込到控制收卷嵌カ的目的。
6、激光紙管定位装置。
7、放巻采用液圧式幼カ上下料;无軸气缸頂套装置，透合无行年之率囘，可芍省人カ及縮短.上下料吋同。
8、EPC糾編装置可准硝控制端面精度。
9、系統具有宕功緩冲、停率防松、汁米定氏，定速、巻径迄算等分切功能。

1. This machine is suitable to slit paper, composit material, aluminium foil, printing film, PE, PP, PET. PVC such plastic film, etc. It is an ideal machine for printing packing company for processing.

2. Entire machine is controlled by PLC(two vector motors), man-machine interface, screen touch operation.

3. Unwind part adopts imported pneumatic brake control, the rolling diameter is automatically calculated by PLC, to achieve constant tension control.

  4. Traction control is drive by a vector variable frequency motor, to achieve constant linear velocity control, And effectively cut off interactant tension between rewind and unwind.
  5. The rewind shaft uses firction, is driven by a vector frequency motor. The rewind tension control is according to rewind diameter, thickness, tension set, etc. After operation by the PLC output controlsignals, via control of the friction pressure, to achieve the purpose of winding tension.
  6. Machine equip with laser mark position device.
  7. Unwind part adopts hydraulic power feed, shaftless, which can save much labour force, and shorten time.
  8. Auto meter presetting, EPC error correction device is positive to assure the accuracy.

9. The feature of machine is stability, security, efficienct, etc.

姓名：		电话：
公司：		邮箱：
内容：

分条机

产品中心

产品推荐Recommend

SLM-A 型电脑自动高速分切机

分切机

联系方式